Sand Blaster/Painter | Temp to Hire| Tulsa, OK Nigh shift + OT Pay: $17+/Hr. + 1 Shift Differential Summary The Blaster role prepares the product for painting by washing, masking, sanding and caulking product per instructions.
Responsibilities Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, dirt and to impart specified finish. Ability to prep product prior/ post painting. Must be able to use a power spray gun Must pass Pulmonary Function Test (PFT); must be fitted and able to wear respirator. Physically active & must be able to lift to 50 lbs. #MC TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities!
* Set up, operate, or tend spraying or rolling machines to coat or paint any of a wide variety of products, including glassware, cloth, ceramics, metal, plastic, paper, or wood, with lacquer, silver, copper, rubber, varnish, glaze, enamel, oil, or rust-proofing materials. Includes painters of transportation vehicles such as painters in auto body repair facilities.
* Hold or position spray guns to direct spray onto articles.
* Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
* Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
* Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
* Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
* Clean equipment and work areas.
* Apply rust-resistant undercoats and caulk and seal seams.
* Start and stop operation of machines, using levers or buttons.
* Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
* Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
* Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
* Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
* Examine, measure, weigh, or test sample products to ensure conformance to specifications.
* Weigh or measure chemicals, coatings, or paints before adding them to machines.
* Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
* Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
* Sand and apply sealer to properly dried finish.
