Principal Engineer Electrical Design

Principal Engineer Electrical Design
Company:

(Confidential)


Principal Engineer Electrical Design

Details of the offer

Duties and Responsibilities Provide design engineering staff augmentation support to SRNS.
Primary responsibilities include engineering
analysis, construction support, walkdowns, design development and generation of
design output documents including but not limited to: Single Line Drawings;
Electrical Equipment Lists; Control System Design; Control Schematics and
Connection Diagrams; Electrical Equipment Specifications; Bulk Material
Specifications; Circuit/Raceway/Wiring/Connection Design; Grounding; Heat
Tracing; Fire Detection; Short Circuit Calculations; Arc Flash Incident Energy
Analysis; Load Flow Analysis; and Electrical System Sizing Calculations.

Engineering services shall be provided using SRNS processes
and procedures.
Programmatic guidance
will be provided by SRNS.

Work Hours:

A 40:hour work week is scheduled.
SRNS utilizes various work schedules;
including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four
days per week), and 9/80s (9 hours/day, five days on week A and 4 days on week
B).
Work week excludes SRNS holidays.
Each workday has a 30:minute unpaid lunch.

Area Security Access:

The candidate must be able to obtain and maintain a
DOE "Q" security clearance. An active DOE clearance is not initially required
to perform assigned duties. After award, the selected candidate will be
notified when for a clearance based on specific work assignments.
Candidates who have possessed an active DOE clearance ("L" or "Q") within the
past two years are preferred.
Requirements
Education

BS Degree in Electrical Engineering or current registration
as a Professional Engineer in Electrical Engineering

Experience/Skills

stylemargin:top: 0in:
:Demonstrated ten years of
design experience (within the last 15 years) in the nuclear or chemical
process industry

:Demonstrated working
knowledge of NEC, IES, NFPA, IEEE, and OSHA requirements

:Demonstrated proficiency
using 2D Computer Aided Drafting and Design (CADD) software (preferably
MicroStation)

:Demonstrated experience
using software (preferably ETAP) to generate electrical system
calculations

:Ability to walk down
systems in the field. These walk downs may involve construction sites with
uneven surfaces and work in progress, walking for distances of over half a
mile, climbing of ladders to access remote areas, dressing out in
protective clothing and environments where a respirator is required.

:Demonstrated previous SRS
Design Engineering or DOE facility experience (Preferred)


Source: Tiptopjob_Xml


Area:

  • Other Jobs / Other Jobs - Crafts

Requirements


Knowledges:

  • Access

Related offers

Recruiting coordinator

Company Description You can either adapt to change, ignore it or lead it. Publicis Worldwide, North America is a full service advertising agency that helps our...


From Publicis Groupe Italia - New York

Published 19 days ago

General psychiatry

Northwest part of the state--Not For Profit CMHC looking for a General Adult Psychiatrist for 3 days a week. 100% Outpatient with no call. Compensation is $12...


From Fcs - Florida

Published 19 days ago

Service technician

Service Technician - Schaumburg, IL Service premium brands of commercial food equipment to include Hobart, Traulsen, Vulcan, Baxter, Wolf and many more! Are you...


From Itw Food Equipment Group - Illinois

Published 19 days ago

Engineering intern

Engineering Intern job is available with Perspecta in United States, Virginia. It is a Senior level role. ATT, CTA , Degree, High School, High school , High...


From Perspecta - Virginia

Published 19 days ago