Fellow Engineer Procurement And Electrical Mechanical Commercial Grade Dedication

Fellow Engineer Procurement And Electrical Mechanical Commercial Grade Dedication
Company:

(Confidential)


Fellow Engineer Procurement And Electrical Mechanical Commercial Grade Dedication

Details of the offer

Duties and Responsibilities Provide engineering staff augment support to the SRNS Engineering; Material
Acquisition Engineering (MAE) organization. Responsibilities include:
Ability to produce high quality, technically accurate and thorough CGD
packages; Conduct CGD technical evaluations, peer reviews and package
approvals; Perform Level 1 and 2 procurement requisition technical and quality evaluations;
Assist with procurement process from point of acquisition initiation to end
user delivery; Interpreting and applying Documented Safety Analysis (DSA)
references; Determining and confirming equipment/component safety function;
Identifying equipment/component performance requirements; Confirming functional
classification and service conditions; Determine and document replacement item
Like:for:Like or Equivalency; Perform Failure Mode, Failure Mechanism and
Effect Analysis (FMEA); Identify and document component Technical Requirements,
Critical Characteristics (CCs) and Acceptance Requirements; Identify dedication
method(s) for verification of acceptance criteria; Perform CGD and Procurement
document review, comment, comment resolution and approval process; Provide peer
and junior CGD engineer mentoring, feedback and development; Conduct CGD peer
reviews providing confirmation of quality, validating attention to detail,
verifying requirement and procedure compliance, and meeting management defined
expectations.

Engineering services shall be provided using SRNS processes
and procedures. Programmatic guidance will be provided by SRNS.

REQUIRED QUALIFICATIONS

Education: BS Degree in Electrical, Mechanical, Chemical, Civil or Nuclear
Engineering and five (5) years DOE, DOD or NRC nuclear CGD and Procurement
experience. Will consider HS Diploma and ten (10) years DOE, DOD or NRC nuclear
Procurement and CGD experience as an equivalent to the education requirements.

Experience/Skills:

Candidate shall demonstrate five (5) or ten (10) years DOE,
DOD or NRC nuclear Procurement and CGD experience commensurate with education
criteria. Candidate shall demonstrate the ability to Qualify as an
Electrical/Mechanical Procurement Engineer and Commercial Grade Dedication (CGD)
Subject Matter Expert (SME). Engineer shall demonstrate proficiency in:
Developing CGD packages; Component procurement processes; NQA:1:2008, Addenda
NQA:1a:2009 CGD requirements; 10 CFR 830; DOE, DOD or NRC CGD and Procurement
requirements and guidelines, and Electric Power Research Institute (EPRI)
guides. Candidate shall be able to perform field walk:downs to verify
as:installed conditions.

Candidate must be able to perform field walk:downs of the job site for the
engineering work being performed. These walk:downs may involve
construction sites with uneven surfaces and work in progress, walking for
distances over a half mile, climbing ladders to access remote areas.

Candidate must demonstrate the following:

- Proficiency, experience and knowledge with procurement
acquisition processes.

- Ability to effectively work in partnership with peers, Design
Authority Engineers, Facility Engineering, Procurement, Quality Assurance and
Test organizations.

- Ability to communicate clear, concise and accurate reports,
evaluations, documents, procedures, reviews, comment resolutions, email and
oral presentations.

- Ability to provide peer and junior CGD engineer mentoring,
feedback and development.

- Ability to coordinate, interface and communicate with
management, engineering, facility, operations, quality assurance and test
personnel.

- Experience with computers and software: Microsoft Office (Word,
Excel)

Work Hours:

A 40:hour work week is scheduled. SRNS utilizes
various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s
(10 hours/day; four days per week), and 9/80s (9 hours/day, five days on week A
and 4 days on week B). Workweek


Source: Tiptopjob_Xml


Area:

  • Other Jobs / Other Jobs - Crafts

Requirements


Knowledges:

  • Access

Related offers

Recruiting coordinator

Company Description You can either adapt to change, ignore it or lead it. Publicis Worldwide, North America is a full service advertising agency that helps our...


From Publicis Groupe Italia - New York

Published 20 days ago

General psychiatry

Northwest part of the state--Not For Profit CMHC looking for a General Adult Psychiatrist for 3 days a week. 100% Outpatient with no call. Compensation is $12...


From Fcs - Florida

Published 20 days ago

Service technician

Service Technician - Schaumburg, IL Service premium brands of commercial food equipment to include Hobart, Traulsen, Vulcan, Baxter, Wolf and many more! Are you...


From Itw Food Equipment Group - Illinois

Published 20 days ago

Engineering intern

Engineering Intern job is available with Perspecta in United States, Virginia. It is a Senior level role. ATT, CTA , Degree, High School, High school , High...


From Perspecta - Virginia

Published 20 days ago